Nortel Meridian 1 Option 11C Expansion Manuallines page 38

Page 38 of 72 Chapter 3—Add Expansion cabinets/chassis using fiber-optic connectivity
Figure 8
Glass fiber-optic cable connection on the SSC card
Glass fiber-optic cable connections
553-3021-208 Standard 1.00
16 Insert the LED cable on the SSC card into the LED connector on
the daughterboard (if the daughterboard is a dual-port
daughterboard). If the daughterboard is a single-port
daughterboard, do not use the LED cable.
The LED cable connection provides the second LED on the faceplate.
17 Install the daughterboard in the appropriate connector on the
SSC card.
Note: The connector labelled "Fiber 1" is for Expansion Chassis 1
(card slots 11 to 20) and 3 (card slots 31-40). The connector labelled
"Fiber 2" is for Expansion Chassis 2 (card slots 21-30) and 4 (card slots
41 to 50). Glass and plastic fiber-optic connections can be used in
either "Fiber 1" or "Fiber 2". See Figure 9 on page 39.
April 2000