Chapter 3—Add Expansion cabinets/chassis using fiber-optic connectivity
Figure 11
Fiber routing bracket installed on the chassis
d
Install the spool on the bracket. Use the captive fastener on the
spool to fasten the spool to the bracket.
Note 1: The captive fastener makes the spool easy to attach and
remove to install or replace circuit cards.
Note 2: Use the tab on the bracket to orient the spool. Loop the cables
around the spool once. See Figure 12.
e
Route the cables through the cutout on the right-hand side of the
chassis. See Figure 12.
Spool tab
Cables routed through
cutout on bracket
Option 11C and 11C Mini
Page 41 of 72
Expansion Guide