Nortel Meridian 1 Option 11C Expansion Manuallines page 49

Chapter 3—Add Expansion cabinets/chassis using fiber-optic connectivity
Figure 16
Fiber routing bracket
Spool tab
Fiber routing
bracket
Screws provided
in the kit
b Install the bracket vertically in the chassis.
Insert the two screws (supplied in the NTTK24AA kit) through the
two holes in the bracket. Fasten the bracket to the fan baffle on
the chassis. See Figures 10 and 11.
c Route the cables coming from the System Controller card through
the cutout on the spool bracket. See Figure 11.
Screw holes for
fastening the
fiber routing bracket
Option 11C and 11C Mini
Page 49 of 72
Expansion Guide