Nortel Meridian 1 Option 11C Expansion Manuallines page 40

Page 40 of 72 Chapter 3—Add Expansion cabinets/chassis using fiber-optic connectivity
553-3021-208 Standard 1.00
18 Install the SSC card in slot 0 of the Primary Main Chassis.
19 Install additional circuit cards in their assigned slots in the
Primary Main Chassis.
20 Install an NTTK24AA Fiber Routing Guide in the chassis.
a Detach the spool portion of the guide assembly from the
P0903797 fiber routing bracket (if this is not already done). See
Figure 10.
Figure 10
Fiber routing bracket
Fiber routing
bracket
Spool tab
Screws provided
b Install the bracket vertically in the chassis.
Insert the two screws (supplied in the NTTK24AA kit) through the
two holes in the bracket. Fasten the bracket to the fan baffle on
the chassis. See Figures 10 and 11.
c Route the cables coming from the System Controller card through
the cutout on the spool bracket. See Figure 11.
April 2000
in the kit
Screw holes for
fastening the
fiber routing bracket