Resets - Siemens SITRANS L Operating Instructions Manual

Setup with the integrated HMI
7.8.4 Resets
7.8.4

Resets

Restart transmitter
Is used to restart the device without switching off the supply voltage.
Note
The simulation is interrupted. Saved configurations are not reset
Setting
RESET
Reset
Is used to provide various reset options of the device.
If the " Restore factory settings" option is selected, all parameters are reset to the
default settings, except
•
•
•
•
•
Selecting the " Restore ordered configuration" option restores the device settings
ordered by the customer. The parameters that were not configured via the order are
reset to their default settings.
Setting
RESET
Reset peak values
Resets all recorded peak values.
60
Selection
DEVICE RSTRT
Device address" remains unchanged
Value of the " User PIN" (write protection) is not reset
Peak values" are not reset
Automatic false echo suppression" is reset to the default setting (deactivated),
but the detected TVT is not lost
User-specific TVT setting" is reset to the default setting (deactivated), but " User-
specific TVT index markers"" are not lost
Selection
RESET
Selection
CANCL
OK
Selection
NO
FACT
CUST
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
Description
Cancel
Restart transmitter
Description
Cancel
Restore default settings
Restore ordered
configuration
SITRANS LR150