Siemens SITRANS L Operating Instructions Manual page 51

Setup with the integrated HMI
7.5.3 Quick setup volume
Vessel dimension A
VESSEL DIM A:
Adjusts the height of the vessel bottom in the case of a conical or flat inclined
bottom.
Lower calibration point
LOWER CAL PT:
Sets the distance from the transmitter reference point to the lower calibration point:
usually corresponds to the zero point of the process.
Upper calibration point
UPPER CAL PT:
Sets the distance from the transmitter reference point to the upper calibration point:
usually corresponds to the full level.
Volume unit
VOL UNITS:
Sets the measuring units for the volume.
•
•
•
•
•
•
•
Confirm
CONFIRM:
Accepts the settings as the last step in the wizard.
Setting Yes:
The wizard is closed and settings are applied.
Setting No:
The wizard is closed and settings are not applied. They must be entered again when
the wizard is run again.
42
Litre (l)
Hectolitre (hl)
3
Cubic meters (m )
3
Cubic inches (in )
Gallons (gal)
3
Cubic foot (ft )
Barrel (bbl)
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
SITRANS LR150