Siemens SITRANS L Operating Instructions Manual page 48

Material type
Used to optimize the device function depending on the type of material and vessel or
application:
Setting
MATERIAL TYPE
Unit
UNITS:
Sets the measuring unit used (default setting in brackets):
•
•
•
•
Lower calibration point
LOWER CAL PT:
Sets the distance from the transmitter reference point to the lower calibration point:
usually corresponds to the zero point of the process.
Upper calibration point
UPPER CAL PT:
Sets the distance from the transmitter reference point to the upper calibration point:
usually corresponds to the full level.
Confirm
CONFIRM:
Accepts the settings as the last step in the wizard.
Setting Yes:
The wizard is closed and settings are applied.
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
Selection
LIQUID
SOLID
Meter " m" (3 decimal places)
Centimeter " cm" (1 decimal place)
Feet " ft" (3 decimal places)
Inches " in" (2 decimal places)
7.5.2 Quick setup level, space, distance
Selection
STRGE
PRCSS
WTWLL
PLSTC
OPEN
DEMO MODE
SILO
BIN
OPEN
Setup with the integrated HMI
Vessel
Process vessel with agitation
Wet well
Outside of Plastic Tank
Level of open liquid
Demonstration
Silo
Buffer, surge bin
Heap, pile
Heap profile
39