Siemens SITRANS L Operating Instructions Manual page 39

Setup with the integrated HMI
7.2 Structure and views of the display
Setting
P8
a
If the mode of operation is set accordingly
b
If the mode of operation is set accordingly
Note
If the measured value cannot be shown in the display, " 99999" appears flashing. In
this case the selected unit or scaling must be adapted.
Parameter view
The parameter view shows the parameters, parameter values and the wizards of the
device.
1
2
3
4
Figure 7.4
Editing view
Parameter values can be changed in this view. Wizards are available for certain
parameters.
Note
While the device is in the editing view, the output remains active and continues to
respond to changes.
1
2
3
4
30
Description
STEMP
Parameter name
Parameter value
Parameter number
EDIT" symbol (permanently activated)
Parameter view
Parameter name
Unit of the measured value (no. 1 and 2 are displayed alternately)
Arrows for scrolling (only within an option list)
Parameter number
Electronics temperature
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
SITRANS LR150