Siemens SITRANS L Operating Instructions Manual page 50

Setting
Volume
Material type
Used to optimize the device function depending on the type of material and vessel or
application:
Setting
MATERIAL TYPE
Unit
UNITS:
Sets the measuring unit used (default setting in brackets):
•
•
•
•
Vessel shape
VESSEL SHAPE:
Sets the vessel shape and allows the device to calculate the volume instead of the
level:
•
•
•
•
•
SITRANS LR150
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
VOL
Selection
LIQUID
SOLID
Meter " m" (3 decimal places)
Centimeter " cm" (1 decimal place)
Feet " ft" (3 decimal places)
Inches " in" (2 decimal places)
Linear vessel (LINR)
Conical vessel bottom (CONIC)
Container with flat sloping bottom (FLAT)
Cylindrical vessel (CYLIN)
User-specific (USER)
Description
Volume of the material in
volume unit (related to the level)
Selection
STRGE
PRCSS
WTWLL
PLSTC
OPEN
DEMO MODE
SILO
BIN
OPEN
Setup with the integrated HMI
7.5.3 Quick setup volume
Reference point
Lower calibration point
Selection
Vessel
Process vessel with agitation
Wet well
Outside of Plastic Tank
Level of open liquid
Demonstration
Silo
Buffer, surge bin
Heap, pile
41