Siemens SITRANS L Operating Instructions Manual page 53

Setup with the integrated HMI
7.5.4 Quick setup volume flow
Material type
Used to optimize the device function depending on the type of material or
application:
Setting
MATERIAL TYPE LIQUID
Unit
UNITS:
Sets the measuring unit used (default setting in brackets):
•
•
•
•
Measuring structure
PRIM MEASDEV:
Sets the version of the measuring structure used.
•
•
•
•
Lower calibration point
LOWER CAL PT:
Sets the distance from the transmitter reference point to the lower calibration point:
usually corresponds to the zero point of the process.
Upper calibration point
UPPER CAL PT:
Sets the distance from the transmitter reference point to the upper calibration point:
usually corresponds to the full level.
44
Selection
Meter " m" (3 decimal places)
Centimeter " cm" (1 decimal place)
Feet " ft" (3 decimal places)
Inches " in" (2 decimal places)
Palmer Bowlus flume (PBFLM)
Flow Venturi-, trapezoidal weir, rectangle weir (RWRC)
Flow VNotch-, triangle weir (TPVWR)
User programmable (USER)
Selection
OPEN
FLOW
DEMO
Selection
Open basin
Open flume
Demonstration
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
SITRANS LR150