Siemens SITRANS L Operating Instructions Manual page 63

Setup with the integrated HMI
7.7.6 Volume flow
Note
This menu is only visible on the device if it is configured.
Lower calibration point
LOWER CAL POINT:
Sets the distance from the transmitter reference point to the lower calibration point.
Upper calibration point
UPPER CAL POINT:
Sets the distance from the transmitter reference point to the upper calibration point.
Measuring structure
Sets the version of the measuring structure used.
Setting
VOLUME FLOW
Flow unit
Sets the measurement units for the volume flow.
Setting
VOLUME FLOW
Upper scaling point
UPPER SCALING:
Sets the maximum scaled measured value.
Note
If the parameter " Measurement end" is set in the " Quick commissioning wizard",
parameter " Upper scaling point" is automatically set to the same value.
54
Selection Selection
FLUME TYPE PBFLM
RWRC
TPVWR
CUSTM
Selection Selection
3
VFLOW UNITS m /h
L/min
Ga/min
IGa/min
Description
Other required parameters
Palmer-Bowlus flume
Venturi flume, trapezoidal
weir, rectangular overfall
V-Notch, triangular weir
Custom
Description
Cubic metre
Litres
US gallons
British Gallons
Operating Instructions, 10/2022, 62711-76-01, A5E50352155
SITRANS LR150