MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the fork protector
11.27
Installing the fork protector
11.28
Removing the front fender
11.29
–
Tighten screws
Guideline
Screw, top triple clamp
–
Tighten screws
Guideline
Screw, bottom triple clamp
100804-11
–
Position the brake caliper and mount and tighten screws
Guideline
Screw, front brake caliper
–
Mount cable binder
–
Position the brake line and wiring harness. Put on the clamp and mount and
tighten screws
–
Install the front wheel.
100802-11
x
–
Remove the fork legs.
–
Remove screws
–
Remove the screws on the right fork leg. Lift off the fork protector.
500105-10
x
–
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
Remaining screws, chassis
–
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
Remaining screws, chassis
–
Install the fork legs.
500105-10
–
Remove screws
–
Make sure the spacers remain in place.
500092-10
.
M8
.
M8
M8
.
.
(
p. 58)
x
(
p. 42)
x
on the left fork leg. Lift off the fork protector.
M6
M6
x
(
p. 42)
. Remove the front fender.
20 Nm
(14.8 lbf ft)
15 Nm
(11.1 lbf ft)
.
25 Nm
Loctite
®
243™
(18.4 lbf ft)
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
43
.