MAINTENANCE SCHEDULES
5.3.
Servicing to be carried out by a trained technician only.
5.3.1
5.3.1.1.
Before checking the oil level, ensure that the machine booms are stowed in the travelling position and the
machine is standing on level ground. The oil level must be 1" (2.54 cm) below the top of the oil level gauge.
Refer to the lubrication chart for the correct grade of oil if the reservoir requires topping up.
After checking the oil level, ensure the oil filler plate is fully secure to prevent water contamination or contami-
nation by other impurities .
5.3.1.2
Check the condition of all four tyres.
5.3.2.
5.3.2.1.
Inspect the hydraulic system as follows:-
(a)
Pressurise the hydraulic circuit and inspect the system for any signs ofoil leakage, particularly at
flexible hoses, connections and hydraulic components.
(b)
Examine all pivot pins on booms, cylinders and the levelling system to ensure that they are positively
secured in position.
5.3.2.2.
Check the steering cylinder for oil leakage and the linkage for signs of water.
SERVICING
DAILY ROUTINE SERVICING
Hydraulic Oil Level
WEEKLY ROUTINE SERVICING
Hydraulic System
Tyre Condition
Steering
Model TA50RT
5
Rev. 1 04/99
5 - 9