Emergency Stop; Operation From Platform; Operation From Ground - Terex Genie GS-1932 XH Operator's Manual

Eighth Edition • Second Printing

Emergency Stop

Push in the red Emergency Stop button to the off
position at the ground controls or the platform
controls to stop all functions.
Repair any function that operates when either red
Emergency Stop button is pushed in.
Auxiliary Lowering
1 Pull the auxiliary lowering knob to lower the
platform.

Operation from Ground

1 Be sure the battery pack is connected before
operating the machine.
2 Turn the key switch to ground control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 At the control panel, press Enter button to cycle
between indoor and outdoor area of
operations.
2 Press and hold the lift function enable.
3 Press the platform up or down button.
Part No. 1296776GT

Operation from Platform

1 Be sure the battery pack is connected before
operating the machine.
2 Turn the key switch to platform control.
3 Pull out both ground and platform red
Emergency Stop buttons to the on position.
To Position Platform
1 Press the Indoor or Outdoor
use button.
Note: If no area of operation is
selected the Outdoor area of
operation will automatically be
selected.
2 Press the lift function button.
On the LED screen, a circle
below the lift function symbol
will be displayed.
If the control handle is not moved within seven
seconds of pushing the lift function button, the
circle below the lift function symbol will turn off and
lift function will not operate. Press the lift function
button again.
3 Press and hold the function enable switch on
the control handle.
4 Machines equipped with foot switch: Press and
hold the foot switch and press and hold the
function enable switch on the control handle at
the same time.
5 Move the control handle in the direction
indicated by the markings on the control panel.
™ ™
GS -30 • GS -32 • GS
Operating Instructions
™
-46
Operator's Manual
71