Hyundai Elantra 2024 Owner's Manual page 50

Seats & safety system
WARNING
Take the following precautions when
using the LATCH system:
• Read and follow all installation
instructions provided with your Child
Restraint System.
• To prevent the child from reaching and
taking hold of unretracted seat belts,
buckle all unused rear seat belts and
retract the seat belt webbing behind
the child. Children can be strangled if a
shoulder belt becomes wrapped
around their neck and the seat belt
tightens.
• Never attach more than one Child
Restraint System to a single anchorage.
This could cause the anchor or
attachment to come loose or break.
• Always have the LATCH system
inspected by an authorized HYUNDAI
dealer after a collision. A collision can
damage the LATCH system and may
not properly secure the Child Restraint
System.
WARNING
Make sure that the combined weight of
the child and the child restraint system is
less than 65 lbs. (30 kg) for each LATCH
system.
3-32
Securing a Child Restraint System
seat with tether anchor system
OCN7030032
First secure the child restraint with the
LATCH lower anchors or the seat belt. If
the child restraint manufacturer
recommends that the top tether strap be
attached, attach and tighten the top
tether strap to the top tether strap
anchor.
Tether anchors are located on the
package tray.
To install the tether anchor:
OCN7030031
1. Route the Child Restraint System
top-tether strap over the seatback.
Placing the top tether strap, follow the
instructions of the Child Restraint
System manufacturer.
2. Connect the top-tether strap to the
top-tether anchorage, then tighten the
top-tether strap according to the
instructions of your Child Restraint
System's manufacturer to firmly attach
the Child Restraint System to the seat.