Hyundai Elantra 2024 Owner's Manual page 320

Driver assistance system
Information
Blind-Spot Collision-Avoidance Assist
uses the following sensors:
• Front view camera
• Rear corner radars
Refer to the "Driver assistance system
sensors" section in this chapter for the
location.
Blind-spot
Collision-Avoidance Assist
settings
Blind-Spot Safety
OCN7073163N
With the ignition switch ON, go to User
settings > Driver Assistance > Driving
Safety > Blind-Spot Safety from the
settings menu in the instrument cluster or
Settings > Vehicle > Driver Assistance >
Driving Safety > Blind-Spot Safety from
the settings menu in the infotainment
system to select the following:
If Blind-Spot Safety is
selected,Blind-Spot Collision-Avoidance
Assist will warn the driver with a warning
message, an audible warning depending
on the collision risk
7-38
B0320EU02
When the engine is restarted with
Blind-Spot Collision-Avoidance Assist
off,the "Blind-Spot Safety System is Off"
message will appear on the instrument
cluster. If you select Blind-spot safety,
warning light on the side view mirror will
blink for three seconds. In addition, if the
vehicle is turned on, when Blind-Spot
Safety is selected, the warning light on
the side view mirror will blink for three
seconds.
WARNING
The driver should always be aware of the
surroundings and drive safely. If
Blind-spot safety is deselected,
Blind-Spot Collision-Avoidance Assist
cannot assist you.
Information
When the engine is restarted, Blind-Spot
Collision-Avoidance Assist maintains its
last setting.
Information
You can set the Warning Timing and
following Warning Methods:
• Warning Volume/Haptic
Warning/Driving Safety Priority
For more information, refer to the "Driver
assistance system settings" section in this
chapter.