Hyundai Elantra 2024 Owner's Manual page 351

Turning on Smart Cruise Control
OCN7073167
• Press the Driving Assist (
speed is set to the current speed on the
instrument cluster.
• If there is no vehicle in front of you, the
set speed is maintained.
• If there is a vehicle in front of you, your
vehicle speed may be adjusted to
maintain the distance from the vehicle
ahead.
• If the vehicle ahead accelerates and the
distance between vehicles increase,
your vehicle accelerates to the set
speed, and then travels at a constant
speed after your vehicle reaches the set
distance.
Information
• If your vehicle speed is 0-20 mph (0-30
km/h) when you press the Driving
Assist ( ) button, the Smart Cruise
Control speed is set to 20 mph (30
km/h).
• The Driving Assist (
may differ depending on your vehicle
option.
• If you shift from a higher gear to a lower
gear using the manual shift mode or
paddle shifter, the vehicle speed may
not accelerate to the set speed.
) button. The
) button symbol
Setting vehicle distance
OCN7060069
Each time the button is pressed, the
vehicle distance changes as follows:
Distance 4 Distance 3
Distance 1
If you drive at 56 mph (90 km/h), the
distance is maintained as follows:
Distance 4 - about 172 ft. (52.5 m)
Distance 3 - about 130 ft. (40 m)
Distance 2 - about 106 ft. (32.5 m)
Distance 1 - about 82 ft. (25 m)
Information
When the engine is restarted or Smart
Cruise Control is temporarily canceled,
the following distance maintains the last
setting.
7
Distance 2
7-69