Hyundai Elantra 2024 Owner's Manual page 486

Maintenance
Tail light/Stop light/Turn signal
light/Side marker (Outer lamp) (Bulb
type)
1. Turn off the engine.
2. Open the trunk lid.
3. Remove the service cover by pulling it
out.
OCN7080045
4. Loosen the assembly retaining screws
with a cross-tip screwdriver.
OCN7080046
5. Remove the rear combination light
assembly from the body of the vehicle.
OCN7080047
9-58
6. Remove the socket from the assembly
by turning the socket counterclockwise
until the tabs on the socket align with
the slots on the assembly.
7. Remove the bulb from the socket by
pushing it in and rotating it
counterclockwise until the tabs on the
bulb align with the slots in the socket.
Pull the bulb out of the socket.
OCN7080075L
OCN7090019N
[A] Tail/Stop light
[B] Turn signal light
[C] Rear side marker
8. Insert a new bulb by inserting it into the
socket and rotating it until it locks into
place.
9. Install the socket in the assembly by
aligning the tabs on the socket with the
slots in the assembly. Push the socket
into the assembly and turn the socket
clockwise.
10.Reinstall the light assembly to the body
of the vehicle.