Hyundai Elantra 2024 Owner's Manual page 382

Driver assistance system
Rear view
The rear view appears on the screen when
the gear is in R (Reverse) or P (Park) to
assist parking. The rear view has top view,
front view, and side view.
View modes can be selected by pressing
the view buttons (2) on the Surround View
Monitor screen.
Turns on if:
• The gear is shifted to R (Reverse).
• The rear view is selected by pressing
the change view button (2) after
pressing the Parking/View button (1),
while the gear is in P (Park), N (Neutral)
or D (Drive), and vehicle speed is 6 mph
(10 km/h) or less.
Turns off if:
• The gear is shifted from R (Reverse) to P
(Park).
• The Parking/View button (1) is pressed,
while the gear is in P (Park).
Information
The rear view cannot be turned off when
the gear is in R (Reverse) even if the
infotainment system buttons (3) are
pressed.
7-100
3D view
The 3D view shows the image around the
vehicle from various angles.
You can change angles by tapping the
screen. Press the 3D View button again to
return to the initial angle.
Turns on if:
When the 3D view is selected by pressing
the change view button (2):
• The gear is in P (Park), N (Neutral) or D
(Drive) when vehicle speed is below 6
mph (10 km/h).
• The Surround View Monitor is turned on
when the gear is in R (Reverse).
Turns off if:
When the gear is in P (Park), N (Neutral) or
D (Drive):
• The gear is shifted to P (Park) from N
(Neutral) or D (Drive).
• The Parking/View button (1) or the
Infotainment system button (3) is
pressed.
• Vehicle speed is above 6 mph (10
km/h).
When the gear is in R (Reverse):
• The gear is shifted to P (Park).
Information
3D view does not display guidelines.