Save Startup Config; Configuration Download - Planet Networking & Communication SGS-5220 User Manual

4.2.18 Save Startup Config

This function allows save the current configuration, thereby ensuring that the current active configuration can be used at the
next reboot screen in Figure 4-2-22

4.2.19 Configuration Download

The switch stores its configuration in a number of text files in CLI format. The files are either virtual (RAM-based) or stored in
flash on the switch.
There are three system files:
•
running-config: A virtual file that represents the currently active configuration on the switch. This file is volatile.
•
startup-config: The startup configuration for the switch, read at boot time.
•
default-config: A read-only file with vendor-specific configuration. This file is read when the system is restored to default
settings.
It is also possible to store up to two other files and apply them to running-config, thereby switching configuration.
Configuration Download page allows the download the running-config, startup-config and default-config on the switch. Please
refer to the Figure 4-2-24 shown below.
appears. After saving the configuratioin, the screen Figure
Figure 4-2-22: Configuration Save page Screenshot
Figure 4-2-23: Finish Saving page Screenshot
Figure 4-2-24: Configuration Download page Screenshot
User's Manual of SGS-5220 Series
76
4-2-23 will appear.