Lldp Poe Neighbours - Planet Networking & Communication SGS-5220 User Manual

User's Manual of SGS-5220 Series

4.16.8 LLDP PoE Neighbours

This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an
LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure 4-16-78 appears.
Figure 4-16-87: LLDP PoE Neighbour Screenshot
Please note that administrator has to enable LLDP port from LLDP configuration, please refer to the following example (The
screen in Figure 4-16-98 appears.) To enable LLDP function from port1 to port3, administrator has to plug a PD that supports
PoE LLDP function, and then administrator is going to see the PoE information of the PD from LLDP.
Figure 4-16-98: LLDP Configuration Screenshot
330