Mac-Based Vlan - Planet Networking & Communication SGS-5220 User Manual

4.6.8 MAC-based VLAN

The MAC-based VLAN enties can be configured here. This page allows for adding and deleting MAC-based VLAN entries and
assigning the entries to different ports. This page shows only static entries. The MAC-based VLAN screen in
appears.
Figure 4-6-18: MAC-based VLAN Membership Configuration page Screenshot
The page includes the following fields:
Object
• Delete
• MAC Address
• VLAN ID
• Port Members
• Adding a New
MAC-based VLAN
Buttons
: Click to add a new MAC-based VLAN entry.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Description
To delete a MAC-based VLAN entry, check this box and press save. The entry
will be deleted in the stack.
Indicates the MAC address.
Indicates the VLAN ID.
A row of check boxes for each port is displayed for each MAC-based VLAN entry.
To include a port in a MAC-based VLAN, check the box. To remove or exclude
the port from the MAC-based VLAN, make sure the box is unchecked. By default,
no ports are members, and all boxes are unchecked.
Click "Add New Entry" to add a new MAC-based VLAN entry. An empty row is
added to the table, and the MAC-based VLAN entry can be configured as
needed. Any unicast MAC address can be configured for the MAC-based VLAN
entry. No broadcast or multicast MAC addresses are allowed. Legal values for a
VLAN ID are 1 through 4095.
The MAC-based VLAN entry is enabled when you click on "Save". A MAC-based
VLAN without any port members will be deleted when you click "Save".
The "Delete" button can be used to undo the addition of new MAC-based VLANs.
131
User's Manual of SGS-5220 Series
Figure 4-6-18