Acl Ports Configuration - Planet Networking & Communication SGS-5220 User Manual

4.10.4 ACL Ports Configuration

Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in
The page includes the following fields:
Object
•
Port
•
Policy ID
•
Action
•
Rate Limiter ID
• Port Redirect
• Logging
Figure 4-10-4: ACL Ports Configuration page Screenshot
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
Specify the logging operation of this port. The allowed values are:
■
Enabled: Frames received on the port are stored in the System Log.
■
Disabled: Frames received on the port are not logged.
The default value is "Disabled".
Please note that the System Log memory size and logging rate are limited.
224
User's Manual of SGS-5220 Series
Figure 4-10-4 appears.