Protocol-Based Vlan - Planet Networking & Communication SGS-5220 User Manual

• Add New Entry
Buttons
: Click to add a new entry in mapping table.
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
Auto-refresh : Check this box to refresh the page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the page immediately.

4.6.10 Protocol-based VLAN

This page allows you to add new protocols to Group Name (unique for each Group) mapping entries as well as allow you to see
and delete already mapped entries for the switch. The Protocol-based VLAN screen in
The page includes the following fields:
Object
• Delete
• Frame Type
exclude the port from the IP subnet-based VLAN, make sure the box is
unchecked. By default, no ports are members, and all boxes are unchecked.
Click "Add New Entry" to add a new IP subnet-based VLAN entry. An empty row
is added to the table, and the IP subnet-based VLAN entry can be configured as
needed. Any IP address/mask can be configured for the IP subnet-based VLAN
entry. Legal values for a VLAN ID are 1 through 4095.
The IP subnet-based VLAN entry is enabled when you click on "Save". The
"Delete: button can be used to undo the addition of new IP subnet-based VLANs.
Figure 4-6-20: Protocol to Group Mapping Table page Screenshot
Description
To delete a Protocol to Group Name map entry, check this box. The entry will be
deleted on the switch during the next Save.
Frame Type can have one of the following values:
User's Manual of SGS-5220 Series
Figure 4-6-20
133
appears.