Siemens MindConnect Nano System Manual page 65

For more information about how to create a new data source see chapter
and data points for MindConnect
Modbus RTU data source parameter
In order to connect a Modbus RTU device, you need to select the Modbus RTU protocol and
enter the following data source parameters:
Parameter
Serial Port
Serial Type
Baud rate
65
Nano.
Description
Available serial ports:
- COM1
- COM2
Supported serial communication standards:
- RS232 (default)
- RS422
- RS485
Baud rate for serial communication:
- 9600 (default)
- 2400
- 4800
- 19200
- 38400
- 57600
- 115200
4.5 Overview of Modbus RTU protocol for MindConnect Nano
Adding a data source
Configuring protocols
MindConnect Nano
System Manual 7/2023