1. Manuals
  2. Brands
  3. Siemens Manuals
  4. Switch
  5. RUGGEDCOM M2100F
  6. Installation manual

Siemens RUGGEDCOM M2100F Installation Manual

Simatic net rugged ethernet switches
Hide thumbs Also See for RUGGEDCOM M2100F:
Table of Contents

Advertisement

Quick Links

Download this manual
Installation Manual
SIMATIC NET
Rugged Ethernet Switches
RUGGEDCOM M2100F
Edition
01/2020
https://www.siemens.com

Advertisement

Table of Contents
loading

Related Manuals for Siemens RUGGEDCOM M2100F

Summary of Contents for Siemens RUGGEDCOM M2100F

  • Page 1 Installation Manual SIMATIC NET Rugged Ethernet Switches RUGGEDCOM M2100F Edition 01/2020 https://www.siemens.com...
  • Page 2 Preface Introduction Installing the Device SIMATIC NET Device Management Rugged Ethernet Switches RUGGEDCOM M2100F Communication Ports Technical Specifications Installation Manual Certification 01/2020 C79000-G8976-1342-06...
  • Page 3 Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommend- ed or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.

  • Page 4: Table Of Contents

    Preface ............................v Related Documents ......................... v Accessing Documentation ....................... v Training ........................... v Customer Support ........................vi Contacting Siemens ........................ vi Introduction ........................... 1 Feature Highlights ....................1 Description ......................2 Required Tools and Materials ................. 3 Decommissioning and Disposal ................3 Cabling Recommendations ..................
  • Page 5 European Union (EU) ..................33 6.1.3 FCC ........................34 6.1.4 FDA/CDRH ......................34 6.1.5 ISED ........................34 6.1.6 ISO ........................35 6.1.7 RoHS ........................35 6.1.8 Other Approvals ....................35 EMC and Environmental Type Tests ..............35 RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...

  • Page 6: Preface

    Preface This guide describes the RUGGEDCOM M2100F. It describes the major features of the device, installation, commissioning and important technical specifications. It is intended for use by network technical support personnel who are responsible for the installation, commissioning and maintenance of the device. It is also recom- mended for use by network and system planners, system programmers, and line technicians.

  • Page 7: Customer Support

    Preface Customer Support Customer Support Customer support is available 24 hours, 7 days a week for all Siemens customers. For technical support or general information, contact Siemens Customer Support through any of the following methods: Online Visit http://www.siemens.com/automation/support-request to submit a Support Request (SR) or check on the status of an existing SR.

  • Page 8: Introduction

    (ST, MTRJ, LC, SC) without loss of port density. The RUGGEDCOM M2100F is packaged in a rugged galvanized steel enclo- sure with industrial grade DIN, panel, or 48 cm (19 in) rack-mount mounting options.

  • Page 9: Description

    CSA/UL 60950-1 safety approved to 85 °C (185 °F) Description The RUGGEDCOM M2100F features various ports, controls and indicator LEDs on the display panel for connecting, configuring and troubleshooting the device. The dis- play panel can be located on the rear, front or top of the device, depending on the mounting configuration.

  • Page 10: Required Tools And Materials

    "Connect- ing to the Device (Page 19)". Required Tools and Materials The following tools and materials are required to install the RUGGEDCOM M2100F: Tools/Materials Purpose AC power cord (16 AWG) For connecting power to the device.

  • Page 11: Cabling Recommendations

    Siemens also does not recommend using copper Ethernet ports to interface with de- vices in the field across distances that could produce high levels of ground potential rise (i.e.

  • Page 12: Supported Fiber Optic Cables

    NOTICE Worn, damaged or missing seals must be replaced immediately. Replacement seals are available for purchase from Siemens. For more information, contact a Siemens Sales representative. There are three ways to determine if a security seal has been tampered with: •...
  • Page 13 Introduction 1.6 Tamper-Evident Security Seals For information about the placement of security seals, refer to the RUGGEDCOM RUGGEDCOM M2100F FIPS 140-2 Non-Proprietary Security Policy [https://support.in- dustry.siemens.com/cs/ww/en/view/109757984] RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...

  • Page 14: Installing The Device

    This product contains no user-serviceable parts. Attempted service by unauthorized personnel shall render all warranties null and void. Changes or modifications not expressly approved by Siemens AG could invalidate specifications, test results, and agency approvals, and void the user's authority to operate the equipment.

  • Page 15: Unpacking The Device

    If any item is missing or damaged, contact Siemens for assistance. Mounting the Device The RUGGEDCOM M2100F is designed for maximum mounting and display flexibili- ty. It can be equipped with connectors that allow it to be installed in a 48 cm (19 in) rack or directly on a panel.

  • Page 16: Mounting The Device To A Rack

    2.3.1 Mounting the Device to a Rack The RUGGEDCOM M2100F can be secured to a standard 48 cm (19 in) rack using separately purchased rack mount adapters. The adapters can be installed at the front or rear of the chassis.

  • Page 17: 2.3.2 Mounting The Device To A Panel

    Secure the adapters to the rack using the supplied hardware. 2.3.2 Mounting the Device to a Panel For panel installations, the RUGGEDCOM M2100F can be equipped with panel adapters pre-installed on each side of the chassis. The adapters allow the device to be attached to a panel using screws.

  • Page 18: Connecting The Failsafe Alarm Relay

    Control of the failsafe relay output is configurable through RUGGEDCOM M2100F . One common application for this relay is to signal an alarm if a power failure oc- curs. For more information, refer to the RUGGEDCOM M2100F User Guide for the RUGGEDCOM M2100F.

  • Page 19: Connecting Power

    Figure 2.3 Failsafe Alarm Relay Wiring Connecting Power The RUGGEDCOM M2100F supports a single or dual redundant AC and/or DC power supplies. The RUGGEDCOM M2100F can be equipped with either a screw-type or pluggable terminal block, which provides power to both power supplies . The screw-type ter- minal block is installed using Phillips screws and compression plates, allowing either bare wire connections or crimped terminal lugs.

  • Page 20: Connecting Ac Or Dc Power

    Identify the internal power module (POWER 1 or POWER 2) appropriate for the power supply (AC or DC). Use these screws along with #6 ring lugs to secure the wires to the terminal block. Note For wiring options, refer to "Wiring Examples (Page 15)". RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 21 Install the supplied metal jumper between terminals 2, 4 and 6 to connect the surge ground terminals to the chassis ground terminal. The surge ground termi- nals are used as the ground conductor for all surge and transient suppression cir- cuitry internal to the unit. RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...

  • Page 22: 2.5.2 Wiring Examples

    Make sure the supplied terminal block cover is always installed before the de- vice is powered. Install the terminal block cover. 2.5.2 Wiring Examples The following illustrate how to connect power to single and dual power supplies. RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 23 Installing the Device 2.5.2 Wiring Examples Figure 2.6 Single AC Power Supply Figure 2.7 Single DC Power Supply RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 24 Installing the Device 2.5.2 Wiring Examples Figure 2.8 Dual AC Power Supply Figure 2.9 Dual DC Power Supply RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 25 Installing the Device 2.5.2 Wiring Examples Figure 2.10 Dual AC/DC Power Supply RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...

  • Page 26: Device Management

    This section describes how to connect to and manage the device. Connecting to the Device The following describes the various methods for accessing the RUGGEDCOM M2100F console and Web interfaces on the device. For more detailed instructions, refer to the RUGGEDCOM M2100F User Guide for the RUGGEDCOM M2100F.

  • Page 27: Configuring The Device

    Communication Ports Connect any of the available Ethernet ports on the device to a management switch and access the RUGGEDCOM M2100F console and Web interfaces via the device's IP address. For more information about available ports, refer to "Communication Ports (Page 21)".

  • Page 28: Communication Ports

    The exact configuration of the device can be determined by reading the factory da- ta file through the RUGGEDCOM M2100F user interface. For more information about how to read the factory data file, refer to the RUGGEDCOM M2100F User Guide for the RUGGEDCOM M2100F.

  • Page 29: Copper Ethernet Ports

    Figure 4.2 Port LEDs Copper Ethernet Ports The RUGGEDCOM M2100F supports several 10/100Base-TX and 10/100/1000Base- TX Ethernet ports that allow connection to standard Category 5 (CAT-5) unshielded twisted-pair (UTP) cables with Micro-D male connectors. The Micro-D connectors are directly connected to the chassis ground on the device and can accept CAT-5 shield- ed twisted-pair (STP) cables.

  • Page 30: Fiber Optic Ethernet Ports

      Tx Connector Tx Connector Rx Connector Rx Connector Figure 4.6 SC Port Figure 4.7 ST Port For specifications on the available fiber optic Ethernet ports, refer to "Fiber Optic Eth- ernet Port Specifications (Page 27)". RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 31 Communication Ports 4.2 Fiber Optic Ethernet Ports RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...

  • Page 32: Technical Specifications

    Technical Specifications This section details the specifications and operating conditions of the device. Power Supply Specifications The RUGGEDCOM M2100F can be equipped with the following power supplies: CAUTION Electrical hazard – risk of damage to the device Make sure power input to the device is within the specified input range.

  • Page 33: Copper Ethernet Port Specifications

    Note • Maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associate when determining maximum segment distances. • All optical power numbers are listed as dBm averages.

  • Page 34: Fiber Optic Ethernet Port Specifications

    14.2 Typical. Typical distance. The maximum distance is greatly dependent on factors such as cable type, the number of connectors and number of splices. Consult a Siemens sales associates when determining maximum distances. Fast Ethernet (10/100 Mbps) Optical Specifications Mode...

  • Page 35: Operating Environment

    5.6 Operating Environment Typical distance. The maximum segment length is greatly dependent on factors such as fiber quality, and the number of patches and splices. Consult a Siemens sales associates when determining maximum segment distances. Operating Environment The RUGGEDCOM M2100F is rated to operate under the following environmental conditions.
  • Page 36 Technical Specifications 5.8 Dimension Drawings 438.15 Figure 5.1 Overall Dimensions RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 37 Technical Specifications 5.8 Dimension Drawings 32.77 21.08 11.68 479.29 478.79 4.57 Figure 5.2 Rack Mount Dimensions RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 38 Technical Specifications 5.8 Dimension Drawings 467.4 275.6 482.6 Figure 5.3 Panel Mount Dimensions RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 39 Technical Specifications 5.8 Dimension Drawings RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...

  • Page 40: Certification

    Certification The RUGGEDCOM M2100F device has been thoroughly tested to guarantee its con- formance with recognized standards and has received approval from recognized reg- ulatory agencies. Approvals This section details the standards to which the RUGGEDCOM M2100F complies. 6.1.1 This device meets the requirements of the following Canadian Standards Association (CSA) standards under certificate 16.70068356:...

  • Page 41: 6.1.3 Fcc

    Methods of Measurement The device is marked with a CE marking and can be used throughout the European community. A copy of the CE Declaration of Conformity is available from Siemens AG. For contact information, refer to "Contacting Siemens (Page vi)".

  • Page 42: Iso

    Quality management systems – Requirements 6.1.7 RoHS This device is declared by Siemens AG to meet the requirements of the following Ro- HS (Restriction of Hazardous Substances) directives for the restricted use of certain hazardous substances in electrical and electronic equipment: •...
  • Page 43 2.5 kV Common Oscillatory DC Power Ports 1 kV Differential Mode @1 MHz AC Power Ports IEC 61000-4-16 Mains Frequen- Signal Ports 30 V Continuous cy Voltage AC and DC 300 V for 1s Power Ports RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 44 EMC Immunity Type Tests per IEEE 1613 Note The RUGGEDCOM M2100F meets Class 2 requirements for an all-fiber configuration and Class 1 requirements for copper ports. Class 1 allows for temporary communica- tion loss, while Class 2 requires error-free and interrupted communications.
  • Page 45 Low Pressure Altitude Opera- tional, High Temperature Stor- age, High Temperature Opera- tional, Low Temperature Stor- age, Low Temperature Oper- ational, Temperature Shock Storage, Humidity, Accelera- tion, Salt Fog and Vibration MIL-STD-1275B Power Quality Per Standard RUGGEDCOM M2100F Installation Manual, 01/2020, C79000-G8976-1342-06...
  • Page 46 Further Information Siemens RUGGEDCOM https://www.siemens.com/ruggedcom Industry Online Support (service and support) https://support.industry.siemens.com Industry Mall https://mall.industry.siemens.com Siemens AG Digital Industry Process Automation Postfach 48 48 90026 NÜRNBERG GERMANY...

Table of Contents