Siemens MindConnect Nano System Manual page 29

Requirement
You have created a data source.
Procedure
To add a data point to a data source, for example: "Pressure", follow these steps:
1. Click on the asset in the "Assets" tab, for example: "Wind turbine".
2. Click on the asset icon, for example: "MindConnect Nano".
3. To edit the data source you have to click on "Enter Edit Mode".
Edit functions appear next to the data source.
4. Click on "Add Datapoint".
5. Enter data point data.
29
Configuring data in Asset Manager
3.5 Adding data points for MindConnect Nano
System Manual 7/2023
MindConnect Nano