Siemens MindConnect Nano System Manual page 17
Insights hub
Hide thumbs
Also See for MindConnect Nano:
- Getting started (96 pages) ,
- Quick start (2 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
4. In "Diagnostic Settings" section, make the changes in Auto Log Upload or Log Level.
5. Click "Save".
Auto Log Upload
If Auto Log Upload is enabled, the device uploads all the generated logs to Insights Hub
periodically.Log upload functionality for the device is enabled by default.
If Auto Log Upload is disabled, click "Upload Logs now" to upload logs manually as
shown in below image.
Log Levels
Log level represents the log level of MindConnect device. There are five possible log levels, and
the hierarchy is as follows in lowest (TRACE) to highest (ERROR) priority. In "TRACE" mode, the
device will log extensively and in "ERROR" mode device will only log error messages.
The selected log level and logging mechanism works as logging only selected level and the
higher levels.
Log level is set to "INFO" by default.
17
Overview of onboarding MindConnect Nano
2.6 Configuring diagnostic settings
MindConnect Nano
System Manual 7/2023
Advertisement
Table of Contents
