Siemens MindConnect Nano System Manual page 113

Quality code Quality code
(hex) (dec)
0x80330000 -2144141312 BAD_NODE_ID_INVALID
0x80340000 -2144075776 BAD_NODE_ID_UNKNOWN
0x80360000 -2143944704 BAD_INDEX_RANGE_INVALID
0x803A0000 -2143682560 BAD_NOT_READABLE
0x803B0000 -2143617024 BAD_NOT_WRITABLE
0x803D0000 -2143485952 BAD_NOT_SUPPORTED
0x803E0000 -2143420416 BAD_NOT_FOUND
0x804F0000 -2142306304 BAD_SERVER_URI_INVALID
0x80740000 -2139881472 BAD_TYPE_MISMATCH
0x807D0000 -2155675648 BAD_TCPSERVER_TOO_BUSY
0x80820000 -2138963968 BAD_TCP_INTERNAL_ERROR
0x80860000 -2138701824 BAD_SECURE_CHANNEL_CLOSED The secure channel has been closed.
0x80890000 -2138505216 BAD_CONFIGURATION_ERROR
0x808D0000 -2138243072 BAD_OUT_OF_SERVICE
0x809B0000 -2137325568 BAD_NO_DATA
0x809D0000 -2137194496 BAD_DATA_LOST
0x80AB0000 -2136276992 INVALID_ARGUMENT
0x80AC0000 -2136211456 BAD_CONNECTION_REJECTED
0x80AD0000 -2136145920 BAD_DISCONNECT
113
Short description
8.3 Quality codes OPC UA and S7 protocol
Long description
The syntax of the node ID is not
valid.
Bad item address.
The syntax of the index range
parameter is invalid.
Read operation(s) has problem.
Write operation(s) has problem.
Operation is not supported.
A requested item was not found or a
search operation ended without
success.
The ServerUri is not a valid URI.
Type conversion has problem.
The server cannot process the
request because it is too busy.
TCP internal error occurred.
Lack of configuration info.
OPC service has problems.
No data exists for the requested time
range or event filter.
Data is missing due to collection
started/stopped/lost.
Bad Invalid Argument - all items
could not be read.
Connection problem.
The server has disconnected from
the client.
Appendix
MindConnect Nano
System Manual 7/2023