Table of Contents
Advertisement
TRENDnet User's Guide
Click Apply to save the changes.
4. Under Domain Blocking click on Allow or Deny. The Domains List will then appear.
Enter the Website/URL/domain (e.g.www.trendnet.com) or keyword (e.g. trendnet) to
allow or block access and click Add to add this to the domains list. The entry will be
listed below. Repeat for each additional website or keyword added.
•
Cancel - Discard changes to the domains list.
•
Delete -Delete an existing website/URL/domain or keyword entry, click on the
entry in the Domains List. When selected, the entry will be highlighted. Click
Delete to remove it from the list.
4. Go back to the Domain Blocking section and confirm you want to Allow or Deny
access to the Domains List. It is generally easier to manage a list of Domains for which
access is denied.
5. In Domain Blocking click on Apply to save the selected settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
Protocol/IP filters
Access > Filter > Protocol/IP Filters
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
1. Log into your router management page (see "Access your router management page"
on
page
27).
2. Click on Access, click on Filter, and click on Protocol/IP Filters.
To simplify configuration, there is a list of commonly used pre-defined Protocol/IP Filters
to modify otherwise, you can choose to manually add a new Protocol/IP Filter.
3. Review the protocol/IP filter settings.
•
Enabled – Selecting Enabled turns on the Protocol/IP Filter and selecting
Disabled turns it off.
•
Name – Enter a name for the Protocol/IP Filter.
TEW-731BR
24
Advertisement
Table of Contents
