Table of Contents
Advertisement
TRENDnet User's Guide
User (Optional): The User account is an additional account used for viewing the settings
on the router management page only. Accessing the router management page using the
User account will restrict access to viewing only and will not allow any settings to be
changed.
Default User Name: user
Default Password: user
Set your router date and time
Main > Time
1. Log into your router management page (see "Access your router management page"
on
page
27).
2. Click on Main, and click on Time.
3. Next to Time Zone, click the drop-down list to select your Time Zone.
4. Next to Synchronize the clock with, you can choose one of the following options:
•
Manual – Set your router date and time manually in the Set Time section. To
save changes, click Apply.
Note: Time is specified in 24-hour format.
OR
•
Automatic – Set your router date and time to synchronize with an NTP
(Network Time Protocol) server address (e.g. pool.ntp.org). Enter the NTP
server address next to Default NTP server, (e.g. pool.ntp.org). Next to Daylight
Saving, set the annual range when daylight saving is activated. To save
changes, click Apply.
Note: NTP servers are used for computers and other network devices to synchronize
time across an entire network.
© Copyright 2013 TRENDnet. All Rights Reserved.
5. You can verify the time/date settings next to Local Time at the top of the page. Local
Time displays the current date and time set on your router.
Manually configure your Internet connection
Main > WAN
1. Log into your router management page (see "Access your router management page"
on
page
27).
2. Click on Main, and click on WAN.
3. In the Connection Type drop-down list, click the type of Internet connection provided
by your Internet Service Provider (ISP).
4. Complete the fields required by your ISP.
TEW-711BR
28
Advertisement
Table of Contents
