Table of Contents
Advertisement
2.
After your server starts up and the main menu appears, select Configuration
Settings and press Enter.
3.
Select General Settings and press Enter.
4.
Type a name for the ASM processor of your server in the Name field. This value
can be up to 15 characters long.
5.
Type a number for the ASM processor of your server in the Number field. This
value can be up to 15 characters long.
Notes:
a.
The Name and Number designations apply to the ASM processor and not to
the server.
b. Designate the ASM processor with names and numbers that correspond to
the server designations to which they apply.
6.
Press F6 to save the values and return to the main menu. To return to the main
menu without saving, press Esc.
7.
When you are finished using the utility program, select Exit Utility from the main
menu and press Enter.
8.
Select Yes, exit utility and press Enter.
9.
When prompted, remove the diskette from the diskette drive and press Enter to
restart the server.
39
Configuration
Advertisement
Table of Contents
