Table of Contents
Advertisement
3.
4.
5.
6.
7.
8.
Ethernet port connector: The following table shows the pin-number assignments for
the RJ-45 connector. These assignments apply to both 10BASE-T and 100BASE-TX
devices.
Table 17. Ethernet RJ-45 connector pin-number assignments..
102
Hardware Maintenance Manual: xSeries 330 Type 8674 and IntelliStation R Pro Type 6851
On the Adapters tab, select the adapter you want to be on the VLAN and select
Properties.
In the PROSet window, select the adapter that you want to be on a VLAN and
right-click on it.
Select Add VLAN.
Enter the VLAN ID and VLAN name. The VLAN ID must match the VLAN ID of
the switch. The ID range is from 1 to 4094. The VLAN name is for information
only and does not need to match the name on the switch.
Repeat steps 3 through 5 for each VLAN you want the computer to join. Click on
the plus sign (+) next to the selected adapter to view the VLANs you added.
Click OK.
Pin
Signal
1
Transmit data+
2
Transmit data-
3
Receive data+
4
Not connected
Pin
5
Not connected
6
Receive data -
7
Not connected
8
Not connected
Signal
Advertisement
Table of Contents
