Table of Contents
Advertisement
PCI riser card
System board
118
Hardware Maintenance Manual: xSeries 330 Type 8674 and IntelliStation R Pro Type 6851
1.
Power off the server/workstation.
2.
Remove the cover. See "Removing the cover" on page 49.
3.
Disconnect the cables that connect the power supply to the system board.
4.
Remove the screws (2) from the side of the chassis.
5.
Remove the screws at the back of the chassis and power supply.
6.
Slide the power supply away from the side of the chassis and lift up to remove.
To remove the PCI riser card:
Note: Read"Safety information" on page 149 and "Before you begin" on page 46.
1.
Power off the server/workstation.
2.
Remove the cover. See "Removing the cover" on page 49.
3.
Remove any adapters and put them in a safe place.
4.
Disconnect cables.
5.
Gently lift up on the card to disconnect it from the system board port.
To remove the system board:
Note: Read"Safety information" on page 149 and "Before you begin" on page 46.
1.
Power off the server/workstation.
2.
Remove the cover. See "Removing the cover" on page 49.
Advertisement
Table of Contents
