Using The Buzzer - Omron NT20S-ST121B-EV3 User Manual

Various System Settings
3-8-2

Using the Buzzer

Setting the Buzzer
Note
Stopping the Buzzer
Note
To set and quit the menu, press the [WRT & EXIT] touch switch. To quit with-
out setting, press [Quit].
• ON: The key press sound will be given for 0.2 second when a touch
switch is pressed.
• OFF: The key press sound will not be given when a touch key is pressed.
The NT20 can set a buzzer to indicate the occurrence of an emergency or an
NT20 error.
Except when the buzzer has been set so as not to sound at all, the buzzer will
sound when an error occurs. To set the buzzer to sound in other cases, the
following two procedures can be used.
• Controlled by the Host
It is possible to control the NT20 from the Host to sound the buzzer during
the operation.
Refer to 5-4 NT20 Status Control on page 203.
• Set the buzzer as a screen data attribute by using the Support Tool.
When creating the screen data by using the Support Tool, set the buzzer
as a screen attribute so that the buzzer will sound. When the screen in
which this attribute has been set is displayed, the NT20 will give the buzzer
sound.
If the control by the Host and the display of the screen in which the buzzer
attribute has been set are executed simultaneously, the priority is given to the
control by the Host. Refer to the NT Support Tool for Windows Operation Man-
ual (Cat . No.V061-E1-@).
The buzzer sound can be stopped by the following operation.
• Control by the Host
• Switch the screen to a screen which does not have a buzzer attribute.
• Press the touch switch to which the buzzer stop attribute has been set.
If a buzzer stop attribute has been set to a touch switch created on the screen
in which the buzzer attribute has been set, such touch switch can be used to
stop the buzzer sound. For details on setting buzzer attributes for touch
switches, see Allocation of System Key Functions on page 154.
Section 3-8
107