Setting The "Buzzer Sound - Omron NT631 Operation Manuals

Various System Settings
6-9-4

Setting the "Buzzer Sound"

Reference
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
S To confirm the settings and quit the memory switch setting screen, press the
"Quit" touch switch. The settings made last will be set and the NT631/NT631C
will return to the "MAINTENANCE MODE MENU" screen.
S To quit the memory switch setting screen without confirming the settings, press
the "Abort" touch switch. The NT631/NT631C will return to the "MAINTE-
NANCE MODE MENU" screen with the previous settings still in effect.
The NT631/NT631C has a function for sounding a buzzer in response to an in-
struction from the host, or when an error occurs. It is possible to set whether or not
the buzzer actually sounds with the memory switches.
S ON:
The buzzer sounds in response to instructions and when an error occurs.
S OFF:
The buzzer does not sound in response to instructions or when errors occur.
S ERROR ON:
The buzzer sounds only when an error occurs.
The default (factory) setting is "OFF".
- There are other instructions and settings relating to the buzzer, but this memory
switch setting has the highest priority.
- For details on the buzzer, refer to 7-15-5 "Buzzer Function" (page 443).
Select "Memory Switch".
Press "Key Press Sound" to display "ON" or
"OFF".
The setting option changes each time the
touch switch is pressed.
Section 6-9
189