Omron NT20S-ST121B-EV3 User Manual page 156

Screen Creation Procedure
!Caution Carefully check the operation of all screen data and host programs before
Creating and Correcting a Screen
After designating a screen, set the screen properties and
register elements for the screen or correct the screen. If
necessary, create marks, image data, and library data,
and set the initial values of memory table entries. For
details of screens and elements, refer to SECTION 4
NT20 Functions.
Saving a File
Save the created screen data to a file.
Transmitting the Screen Data
Transmit the created screen data to the PT. After
setting the PT in the Transmit mode, execute the
screen data transmission operation with the
Support Tool.
using them. Otherwise the system may operate unpredictably.
Support Tool
Section 4-1
135