Omron NT20S-ST121B-EV3 User Manual page 82

Connecting to the RS-232C Port at the Host
PLC Series
C Series
CompoBus/S
Master Control
Unit
Note
Note
CPU Units with Built-in
NT Link Function
C200HE-CPU42-(Z)E
C200HG-CPU43-(Z)E
C200HG-CPU63-(Z)E
C200HX-CPU44-(Z)E
C200HX-CPU64-(Z)E
C200HX-CPU65-ZE
C200HX-CPU85-ZE
---
SRM1-C02-V2
(1) A CS1W-SCB21 or CS1W-SCB41 Serial Communications Board or
CS1W-SCU21 Serial Communications Unit is required.
(2) A CJ1W-SCU41 Serial Communications Unit is required.
(3) One of the following Communications Boards is required:
C200HW-COM02/COM04/COM05/COM06 (-EV1)
(4) A CQM1H-SCB41 Serial Communications Board is required.
(5) The -V1 versions of CS-series PLCs and CJ-series PLCs support the
high-speed 1:N NT Link as well as the standard 1:N NT Link. Further-
more, the high-speed 1:N NT Link can be used in earlier versions of CS-
series PLCs by installing a new version of Serial Communications Board
or Unit. For details, refer to
(page 65).
Settings at the Host
The Settings required for each Unit are described below.
Connecting a C200HX/HG/HE(-Z)E, CQM1H, or SRM1
PLC Setup Settings
Write the PLC Setup (in the DM Area) settings directly from a Programming
Device (e.g., SYSMAC Support Software) according to the host model and
port.
Connection to
C200HX/HG/HE(-Z)E, SRM1
Built-in RS-232C port
C200HX/HG/HE(-Z)E
Communications Board port A
(See note 1.)
CQM1H port 1 (See note 2.)
C200HX/HG/HE(-Z)E
Communications Board port B
(See note 1.)
(1) RS-232C port on the Communications Board
(2) RS-232C port on the Serial Communications Board
CPU Units Connectable with
Communications Board or Unit
(See note 1.)
C200HE-CPU32-(Z)E (See note 3.)
C200HE-CPU42-(Z)E (See note 3.)
C200HG-CPU33-(Z)E (See note 3.)
C200HG-CPU43-(Z)E (See note 3.)
C200HG-CPU53-(Z)E (See note 3.)
C200HG-CPU63-(Z)E (See note 3.)
C200HX-CPU34-(Z)E (See note 3.)
C200HX-CPU44-(Z)E (See note 3.)
C200HX-CPU54-(Z)E (See note 3.)
C200HX-CPU64-(Z)E (See note 3.)
C200HX-CPU65-ZE (See note 3.)
C200HX-CPU85-ZE (See note 3.)
CQM1H-CPU51 (See note 4.)
CQM1H-CPU61 (See note 4.)
---
Using the High-speed 1:N NT Links
Word Writing
Value
DM6645 5@00 Use 1:N NT Link
@ = largest unit number of
the connected PTs (1 to 7)
DM6555
(See note 3.)
DM6550
Section 2-6
Connectable
to
C200HE (-Z)E
C200HG (-Z)E
C200HX (-Z)E
CQM1H
SRM1
Setting
61