KVM over IP User Manual
Authentication
Disable Local Authentication
Selecting this option disables login authentication on the RCM Series of
KVM Over IP Switch. The switch can only be accessed using LDAP,
LDAPS, MS Active Directory, RADIUS or CC Management
authentication.
RADIUS Settings
To allow authentication and authorization for the RCM Series of KVM
Over IP Switch through a RADIUS server, do the following:
1. Check Enable.
2. Select Preferred or Alternate RADIUS server.
3. Fill in the IP addresses and service port numbers for the Preferred and
Alternate RADIUS servers. You can use the IPv4 address, the IPv6
address or the domain name in the IP fields.
4. Select the Authentication Type: PAP or CHAP.
5. In the Timeout field, set the time in seconds that the RCM Series of
KVM Over IP Switch waits for a RADIUS server reply before it times
out.
172