Winclient Control Panel Functions - ATEN RCM Series User Manual

KVM over IP User Manual

WinClient Control Panel Functions

The Control Panel functions are described in the table below.
Icon
This is a toggle. Click to make the Control Panel persistent – i.e., it
always displays on top of other screen elements. Click again to have
it display normally.
Click to bring up the Video Options dialog box. (see Video Settings,
page 69, for details).
Click to perform a video autosync operation. It is the same as clicking
the Auto Sync button in the Video Options dialog box (see Video
Settings, page 69).
Toggles the display between Full Screen Mode and Windowed Mode.
Click to take a snapshot (screen capture) of the remote display.
See Snapshot, page 91, for details on configuring the Snapshot
parameters.
Click to toggle the remote display between color and grayscale
views.
Click to zoom the remote display window.
Note: This feature is only available in windowed mode (Full Screen
Mode is off). See Zoom, page 83 for details.
Under an accessed port, click to invoke Panel Array Mode (see Panel
Array Mode, page 223).
The RCM Series of KVM Over IP Switch automatically switches
among the ports that were selected for Auto Scanning with the Filter
function (see Filter, page 105). This allows you to monitor their
activity without having to switch among them manually.
Click to select the port you wish to connect to.
Click to send a Ctrl+Alt+Del signal to the remote system.
Click to bring up the on-screen keyboard (see The On-Screen
Keyboard, page 84).
Click to select the mouse pointer type.
Note: This icon changes depending on which mouse pointer type is
selected (see Mouse Pointer Type, page 86).
58
Function