ATEN RCM Series User Manual page 79

An explanation of the Hotkey actions is given in the table below:
Action
Exit Remote
Location
Adjust Video
Toggle Control
Panel
Toggle Mouse
Display
Adjust Mouse
Video Auto Sync
Show/Hide Local
Cursor
Substitute Ctrl Key
Substitute Alt Key
Breaks the connection to the RCM Series of KVM Over IP Switch
and returns you to local client computer operation. This is
equivalent to clicking the Exit icon on the Control Panel. The
default keys are F2, F3, F4.
Brings up the Video Settings dialog box. This is equivalent to
clicking the Video Settings icon on the Control Panel. The default
keys are F5, F6, F7.
Toggles the Control Panel Off and On. The default keys are F3,
F4, F5.
If you find the display of the two mouse pointers (local and
remote) to be confusing or annoying, you can use this function to
shrink the non-functioning pointer down to a barely noticeable tiny
circle, which can be ignored. Since this function is a toggle, use
the hotkeys again to bring the mouse display back to its original
configuration. This is equivalent to selecting the Dot pointer type
from the Mouse Pointer icon on the Control Panel. The default
keys are F7, F8, F9.
Note: The Java Control Panel does not have this feature.
This synchronizes the local and remote mouse movements. The
default keys are F8,F7,F6.
This combination performs an auto-sync operation. It is
equivalent to clicking the Video Auto Sync icon on the Control
Panel. The default keys are F6,F7,F8.
Toggles off and on: hides local cursor and locks the mouse
pointer and keyboard use within the Windows/Java Client AP
window, plus hides the control panel. This is equivalent to
selecting the Single pointer type from the Mouse Pointer icon on
the Control Panel. The default keys are F4,F5.
If your local client computer captures Ctrl key combinations,
preventing them from being sent to the remote server, you can
implement their effects on the remote server by specifying a
function key to substitute for the Ctrl key. If you substitute the F11
key, for example, pressing [F11 + 5] would appear to the remote
server as [Ctrl + 5]. The default key is F11.
Although all other keyboard input is captured and sent to the RCM
Series of KVM Over IP Switch, [Alt + Tab] and [Ctrl + Alt + Del]
work on your local client computer. In order to implement their
effects on the remote server, another key may be substituted for
the Alt key. If you substitute the F12 key, for example, you would
use [F12 + Tab] and [Ctrl + F12 + Del]. The default key is F12.
Chapter 5. The User Interface
Explanation
61