Authentication & Authorization
RADIUS Settings
To allow authentication and authorization through a RADIUS server, do
the following:
1. Check Enable.
2. Fill in the IP addresses and service port of the Preferred RADIUS
Server and Alternate RADIUS Server.
3. In the Timeout field, set the time in seconds that the Matrix Manager
waits for a RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed retries.
5. In the Shared Secret field, key in the character string that you want to
use for authentication between the Matrix Manager and the RADIUS
Server. A minimum of 6 characters is required.
6. On the RADIUS server, Users can be authenticated with any of the
following methods:
Set the entry for the user as su/xxxx
Where xxxx represents the Username given to the user when the
account was created on the Matrix Manager.
Use the same Username on both the RADIUS server and the
Matrix Manager.
Chapter 9. System
149