Sessions - ATEN RCM Series User Manual

Sessions

The Session page lets the administrator and users with User Management
permissions see at a glance which users are currently logged into the RCM
Series of KVM Over IP Switch, and provides information about each of their
sessions.
Note: 1. The Session page isn't available for ordinary users.
2. Users with User Management permissions can only see the sessions
of ordinary users.
3. The Category heading lists the type of user who has logged in: SA
(Super Administrator); Admin (Administrator); Normal user (User).
The meanings of the headings at the top of the page are fairly straightforward.
The IP heading refers to the IP address that the user has logged in from; the
Device and Port headings show which device and port the user is currently
accessing. The Bus ID refers to the bus that the user is currently on (Bus 0 refers
to the Local Console's bus).
Note: 1. The sort order of the information displayed can be changed by
clicking the column headings.
2. The Bus ID also displays on the control panel (see page 56).
See Users and Buses, page 226 for information about buses.
This page also gives the administrator the option of forcing a user logout by
selecting the user and clicking End Session at the bottom of the main panel.
Chapter 6. Port Access
123