Table of Contents
Advertisement
RCM416VA / RCM432VA / RCM464VA / RCM416A / RCM816A
Rack Mounting
The RCM416VA / RCM432VA / RCM416A / RCM816A can be mounted in
a 19" (1U) rack and the RCM464VA can be mounted in a 19" (2U) rack. The
mounting brackets screw into either the front or the back of the unit so that it
can attach to the front or the back of the rack.
Rack Mount - Front
To mount the unit at the front of the rack, do the following:
1. Remove the screws at the front of the unit.
Phillips head
hex M3 x 5
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mount kit
to screw the rack mounting brackets into the front of the unit.
3. Position the device in the front of the rack and align the holes in the
mounting brackets with the holes in the rack.
Chapter 2. Hardware Setup
17
Advertisement
Table of Contents
