Authentication - ATEN CN9600 User Manual

CN9600 User Manual

Authentication

The CN9600 allows log in authentication and authorization through external
programs.
This screen lets you configure the RADIUS, LDAP, and CC Management
settings.
If you want to use a RADIUS, LDAP, CC Authentication instead of the
CN9600 device authentication, check Disable Device Authentication.
Selecting this option will disable login authentication locally on the CN9600.
 RADIUS Settings
To allow authentication and authorization for the CN9600 through a RADIUS
server, do the following:
1. Check Enable.
2. Click the drop-down menu to select whether you wish to use Preferred
RADIUS or Alternate RADIUS.
3. Enter the Server IP addresses and Port number.
4. Check Same as preferred setting if your Alternate RADIUS is the same
as the preferred.
5. In the Timeout field, set the time in seconds that the CN9600 waits for a
RADIUS server reply before it times out.
6. In the Retries field, set the number of allowed RADIUS retries.
7. In the Shared Secret field, enter the character string that you want to use
for authentication between the CN9600 and the RADIUS Server.
38