RCM Series of KVM Over IP Switch User Manual
Stacking and Rack Mount
The RCM Series of KVM Over IP Switch can be stacked on the desktop or rack
mounted in a variety of ways. The following sections take you through the
procedures for each method.
Stacking
The RCM Series of KVM Over IP Switch can be placed on any appropriate
level surface that can safely support its weight plus the weight of its attached
cables. To place the switch, or to stack multiple units, remove the backing
material from the bottom of the rubber feet that came with your package, and
stick them onto the switch's bottom panel at the corners, as shown in the
diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7 cm behind the unit for power cord and cable clearance.
16