Other Commands; Special Code - Sony HSR-X200 Operating Instructions Manual

Commands

Other Commands

ROM VER. INQ (72H)
(Effective only in one-to-one communication with the
specified device)
Acquires the version data of the software that is
controlling SSP of the recorder.
CMD
TxD 72
RxD
d1: Decimal portion of the version number (2-digit
BCD)
d2: Integer portion of the version number (2-digit
BCD)
Example: ROM VER. 1.23
CMD
TxD 72
RxD
MENU UPLOAD (D8H)
(Effective only in one-to-one communication with the
specified device)
Uploads menu data encoded on the recorder.
• With RS-232C, all the menu values can be uploaded.
• With RS-485, only the NORMAL REC MODE SET
and RECORDING CONDITIONS SET values can be
uploaded.
CMD
TxD D8
. . . . .
RxD d1 d2 dk
COMPLETION
d1 to dn: Encoded menu data (3≤k≤24, 3≤n≤144)
dn: ASCII numeric codes 30H to 39H
The device that receives D8H will stop the sequential
transmission if it does not receives the next D8H
within 1 second after sending 40H, and will send the
data from the first data block when it receives D8H
next.
MENU DOWNLOAD (E8H)
(Effective only in broadcast transmission)
Downloads encoded menu data.
• With RS-232C, all the menu values can be
downloaded.
72
(GB)
d1 d2
23 01
d1 d2
CMD
D8
. . . . . . . . . .
40 dk+1 40
COMPLETION
CMD
D8
. . . . .
dn-1 dn 40
COMPLETION
• With RS-485, only the NORMAL REC MODE SET
and RECORDING CONDITIONS SET values can be
downloaded.
CMD
. . . . .
TxD E8 d1 d2 dk
RxD
d1 to dn: Encoded menu data (3≤k≤24, 3≤n≤144)
dn: ASCII numeric codes 30H to 39H
The device that issues E8H will continuously send the
data up to 40H without waiting until the bus opens,
and will issue the next E8H when it confirms that the
bus is open.
The device that received E8H will clear the received
data if it does not receive the next E8H within 1
second after it receives 40H, and when it receives E8H
next, it will recognize the next data block as the first
data block.
CLOCK DOWNLOAD (E9H)
(Effective only in broadcast transmission)
Downloads data specified by subcommands s1, s2, and
s3.
If s1, s2, s3 = 30H, 30H, 30H, the date (year/month/
day) will be downloaded.
If s1, s2, s3 = 30H, 30H, 31H, the time will be
downloaded.
CMD
TxD E9 s1 s2 s3
RxD
s1, s2, s3, dn: ASCII numeric codes 30H to 39H
d1 to dn: Download data
The device that issues E9H will continuously send the
data up to 40H without waiting until the bus opens.

Special Code

ERROR (02H)
• Indicates that the recorder has entered the error status
as an invalid data item was sent while the time and
date values for T/D SEARCH 4 were being entered.
• Indicates that the recorder has received invalid data
for GROUP SET (6CH) or GROUP CLEAR (6DH)
via the RS-485.
CMD CMD CMD
. . . . . . . . . .
40 E8 dk+1 40
CMD CMD
. . . . .
E8 dn-1 dn 40
CMD
. . . . . . . . . .
d1 d2 dn 40