Table of Contents
Advertisement
Configuring Other Settings
Configure settings related to the screen displays.
1
Display the [Other] tab, and configure the following
settings.
[Menu Display]
Select 2D or 3D for the menu screen display format.
The default setting is [2D].
Tip
When [Ch1/Ch2 Rec Mode] is set to [Ch1 2K Rec] in
the [Recording] tab, this item will be grayed out.
[Select Right/Left of Image]
Select which image (left or right) to use for 2D
recorded data when recording still images or
recording simultaneously.
The default setting is [Left].
Tip
When [Ch1/Ch2 Rec Mode] is set to [Ch1 2K Rec] in
the [Recording] tab, this item will be grayed out.
2
When you finish configuration, select [Apply] and
press the ENTER button.
The [Settings] screen appears again.
Function Keys
When using the unit, you can assign certain functions
(recording, playback, etc.) to the function keys (F1 to
F12) at the top of a keyboard and perform these functions
with a single keystroke.
We recommend assigning frequently used functions
based on your working environment.
Tip
To perform controls for only Ch2 without the use of a
touch panel monitor, the Ch2 controls must be assigned to
function keys beforehand.
Using Function Keys
Tip
The function keys are enabled only when the hard
keyboard mode is enabled.
1
Press the MENU button.
The [MENU] screen appears.
2
Select [Settings], and press the ENTER button.
The [Settings] screen appears.
3
Select [System Admin Settings], and press the
ENTER button.
The [System Admin Settings] screen appears
4
Select [Device Settings], and press the ENTER
button.
The [Device Settings] screen appears.
5
Display the [Device 2] tab, and set [Keyboard Mode]
to [Hard Keyboard].
6
Select [Advanced] for [Keyboard Mode], and press
the ENTER button.
The [Function Key Setting] screen appears.
7
Select the check boxes of the necessary function keys,
select [Edit], and then press the ENTER button.
38
Advertisement
Table of Contents
