Checking The Information On Power Failure And Usage Times - Sony HSR-X200 Operating Instructions Manual

Checking the Information on
Power Failure and Usage Times
POWER FAILURE /USED TIME of MAIN MENU 2
permits you to know whether interruption of recording
owing to a power failure.
You can also check the accumulated usage time(s) of
the built-in hard disk(s), the powered time of the
recorder, and the firmware version of the recorder.
1
Press the MENU button to display MAIN MENU 1
and press the MENU button again to switch to
MAIN MENU 2.
2
Select 7. POWER FAILURE /USED TIME.
The POWER FAILURE /USED TIME display
appears.
<POWER FAILURE/USED TIME>
POWER FAILURE
#002 FAILURE 02-12 07:22
RECOVER 02-15 10:20
USED TIME
DISK 1 USE : 00003H
DISK 2 USE : -----H
POWER : 00358H
FIRMWARE : VER 1.00
POWER FAILURE
The occurrence time and the recovery time of the latest
power failure are displayed.
USED TIME
The accumulated usage time(s) of the built-in hard
disk(s) and the recorder are displayed.
FIRMWARE
The firmware version of the recorder is displayed.
To exit this menu, press the EXIT/OSD button.
65
(GB)