Sony HSR-X200 Operating Instructions Manual page 68

Commands
SHIFT → (63H)
Functions the same as clockwise rotation of the Shuttle
dial on the recorder.
SHIFT ↓ (64H)
Functions the same as clockwise rotation of the Jog
dial on the recorder.
Exceptions:
1. Decreases the speed of playback in progress.
2. Decreases values on a menu display.
PLAY SPEED UP (65H)
• Increases values on a menu display.
• Increases the playback speed in Playback mode.
PLAY SPEED DOWN (66H)
• Decreases values on a menu display.
• Decreases the playback speed in Playback mode.
TIMER ON/OFF (60H)
Turns on/off timer recording.
SECURITY LOCK ON (69H)
Turns on the security lock when it is enabled (this
operation corresponds to that by holding the
SHUTTLE HOLD button pressed for 3 seconds on the
recorder).
MENU (74H)
• Sets the recorder to Menu mode.
• Selects the menu displays in Menu mode.
ALARM F (ABH)
Searches for the next alarm event in Playback mode,
and plays it back.
ALARM R (ACH)
Searches for the previous alarm event in Playback
mode, and plays it back.
ZOOM (85H)
• Sets the zoom setting mode. Then, proceed as
follows:
1 Specify the horizontal position of the area to be
zoomed with SHIFT ↑ (54H) or SHIFT ↓ (64H).
2 Register the horizontal position with SHIFT →
(63H).
3 Specify the vertical position of the area to be
zoomed with SHIFT ↑ (54H) or SHIFT ↓ (64H).
4 Register the vertical position with SHIFT → (63H).
• Cancels Zoom mode.
68
(GB)
CHANNEL (8CH)
• Displays the channel input display in Still-Picture
mode. Then, proceed as follows:
1 Select the channel with SHIFT ↑ (54H) or SHIFT ↓
(64H).
2 Register the selection with SHIFT → (63H).
• Cancels the selected channel.
COPY (8DH)
Turns on/off the copy set display.
OSD/EXT (8EH)
• Turns on/off the on-screen data and changes the
display position.
• Cancels Menu mode.
REC STOP (CFH)
Stops recording.
CLOCK ADJUST (E0H)
Resets the minute and second settings of the built-in
clock to 00.
For example, when this command is sent between
13:30:00 and 14:29:59, the clock is reset to 14:00:00.
MENU RESET (E1H)
Resets the settings of the menu being displayed only.